Used Ultrasonic Welders

Refurbished Ultrasonic Welders. We Buy and Sell!
1-800-875-4676





-------------------------------




Search for models by the manufacturer by clicking on the above tabs or use the menu on the left.


Sonitek's own line of refurbished welders

Scroll Down to View All Models

Model # S-840
Frequency
Wattage
Volts

20 kHz

900 watts
120V AC

 

S840 Ultrasonic Welder Model Specifications

  • Output Power: 900 electrical watts to converter 860 mechanical watts to load
  • Output Frequency: 20 kHz
  • Output Amplitude: Variable (with boosters) Weld cycle range: 0.1-4.0 seconds
  • Hold cycle range: 0.05-3.0 seconds
  • Maximum force on part: 440 lbs. @ 100 psig (1.96kN @ 690kPa)
  • Dynamic triggering range: 15 lbs. to 165 lbs. (67-734N)
  • Power requirements: Model S840: 100V, 12 Amps., 50/60 Hz 120V, 10 Amps. 50/60 Hz 200-250V, 5 Amps., 50/60 Hz
  • Pneumatic Requirements: Clean, dry unlubricated air @ 100 psig(690kPa)Max

Dimensions

  • Base: Height: 4.62" (117 mm) Width: 16" (16.37 mm) Depth: 27.83" (740 mm)
  • Column: Diameter 3-1/2" (9 cm) Length: 36" (91.4 cm) Ð Long columns available on special order
  • Housing: Height: 33-1/8" (84.1 cm) Width: 7-1/4" (18.4 cm) Depth: 20-1/2" (52 cm)
  • Stroke: 2-7/8" (7.3 cm)
  • Throat: 12-3/8" (31.4 cm) center of horn to center of column
  • Weight:* 120V unit Ð 125 lbs. (56.7 kg) 200-250V unit Ð 138 lbs. (62.6 kg) * Does not include converter, booster, or horn.

Back to Top

 

Model # S-870
Frequency
Wattage
Volts

20 kHz

1500 watts
240V AC

S870 Model Specifications

  • Output Power: 1500 electrical watts to converter 1450 mechanical watts to load
  • Output Frequency: 20 kHz
  • Output Amplitude: Variable (with boosters)
  • Weld cycle range: 0.1-4.0 seconds
  • Hold cycle range: 0.05-3.0 seconds
  • Maximum force on part: 440 lbs. @ 100 psig (1.96kN @ 690kPa)
  • Dynamic triggering range: 15 lbs. to 165 lbs. (67-734N)
  • Power requirements: 200-250V, 8-1/2 Amps., 50/60 Hz
  • Pneumatic Requirements: Clean, dry unlubricated air @ 100 psig(690kPa)Max

Dimensions

  • Base:Height: 4.62" (117 mm)Width: 16" (16.37 mm) Depth: 27.83" (740 mm)
  • Column: Diameter 3-1/2" (9 cm) Length: 36" (91.4 cm) ­ Long columns available on special order
  • Housing: Height: 33-1/8" (84.1 cm) Width: 7-1/4" (18.4 cm) Depth: 20-1/2" (52 cm)
  • Stroke: 2-7/8" (7.3 cm)
  • Throat: 12-3/8" (31.4 cm) center of horn to center of column
  • Weight:* 120V unit ­ 125 lbs. (56.7 kg) 200-250V unit ­ 138 lbs. (62.6 kg) * Does not include converter, booster, or horn.

Back to Top

Look Familiar? They should! Our new ultrasonic plastic welders are also known worldwide as the Branson model 8400 (S840) and 8700 (S870). The most reliable and easiest to use ultrasonic plastic welder ever built!

The worlds best known 20 kHz Plastic Ultrasonic Welding System -Ultrasonic Plastic Welding- Staking- Insertions- Swaging/Forming- Textile & Film Sealing

Sonitek's ultrasonic welding systems are offered in two models the S-840 and the S-870


-------------------------------

Sonitek Corporation
84 Research Drive
Milford, CT 06460
Tel: (203) 878-9321 Fax: (203) 878-6786

Call Toll Free
1-800-875-4676

© 2002 Sonitek Corporation | Disclaimer | Leasing